[−][src]Struct stm32f103xx_hal::serial::Serial
Serial abstraction
Methods
impl<PINS> Serial<USART1, PINS>[src]
pub fn usart1(
usart: USART1,
pins: PINS,
mapr: &mut MAPR,
baud_rate: Bps,
clocks: Clocks,
apb: &mut APB2
) -> Self where
PINS: Pins<USART1>, [src]
usart: USART1,
pins: PINS,
mapr: &mut MAPR,
baud_rate: Bps,
clocks: Clocks,
apb: &mut APB2
) -> Self where
PINS: Pins<USART1>,
pub fn listen(&mut self, event: Event)[src]
pub fn unlisten(&mut self, event: Event)[src]
pub fn release(self) -> (USART1, PINS)[src]
pub fn split(self) -> (Tx<USART1>, Rx<USART1>, ReleaseToken<USART1, PINS>)[src]
impl<PINS> Serial<USART2, PINS>[src]
pub fn usart2(
usart: USART2,
pins: PINS,
mapr: &mut MAPR,
baud_rate: Bps,
clocks: Clocks,
apb: &mut APB1
) -> Self where
PINS: Pins<USART2>, [src]
usart: USART2,
pins: PINS,
mapr: &mut MAPR,
baud_rate: Bps,
clocks: Clocks,
apb: &mut APB1
) -> Self where
PINS: Pins<USART2>,
pub fn listen(&mut self, event: Event)[src]
pub fn unlisten(&mut self, event: Event)[src]
pub fn release(self) -> (USART2, PINS)[src]
pub fn split(self) -> (Tx<USART2>, Rx<USART2>, ReleaseToken<USART2, PINS>)[src]
impl<PINS> Serial<USART3, PINS>[src]
pub fn usart3(
usart: USART3,
pins: PINS,
mapr: &mut MAPR,
baud_rate: Bps,
clocks: Clocks,
apb: &mut APB1
) -> Self where
PINS: Pins<USART3>, [src]
usart: USART3,
pins: PINS,
mapr: &mut MAPR,
baud_rate: Bps,
clocks: Clocks,
apb: &mut APB1
) -> Self where
PINS: Pins<USART3>,
pub fn listen(&mut self, event: Event)[src]
pub fn unlisten(&mut self, event: Event)[src]
pub fn release(self) -> (USART3, PINS)[src]
pub fn split(self) -> (Tx<USART3>, Rx<USART3>, ReleaseToken<USART3, PINS>)[src]
Auto Trait Implementations
impl<USART, PINS> Send for Serial<USART, PINS> where
PINS: Send,
USART: Send,
PINS: Send,
USART: Send,
impl<USART, PINS> Sync for Serial<USART, PINS> where
PINS: Sync,
USART: Sync,
PINS: Sync,
USART: Sync,
Blanket Implementations
impl<T> From for T[src]
impl<T, U> TryFrom for T where
U: Into<T>, [src]
U: Into<T>,
type Error = Infallible
The type returned in the event of a conversion error.
fn try_from(value: U) -> Result<T, <T as TryFrom<U>>::Error>[src]
impl<T, U> TryInto for T where
U: TryFrom<T>, [src]
U: TryFrom<T>,
type Error = <U as TryFrom<T>>::Error
The type returned in the event of a conversion error.
fn try_into(self) -> Result<U, <U as TryFrom<T>>::Error>[src]
impl<T, U> Into for T where
U: From<T>, [src]
U: From<T>,
impl<T> Borrow for T where
T: ?Sized, [src]
T: ?Sized,
impl<T> BorrowMut for T where
T: ?Sized, [src]
T: ?Sized,
fn borrow_mut(&mut self) -> &mut T[src]
impl<T> Any for T where
T: 'static + ?Sized, [src]
T: 'static + ?Sized,