[−][src]Struct stm32f103xx_hal::gpio::gpioa::PA9
Pin
Methods
impl<MODE> PA9<MODE>
[src]
pub fn into_alternate_push_pull(self, cr: &mut CRH) -> PA9<Alternate<PushPull>>
[src]
Configures the pin to operate as an alternate function push pull output pin
pub fn into_alternate_open_drain(
self,
cr: &mut CRH
) -> PA9<Alternate<OpenDrain>>
[src]
self,
cr: &mut CRH
) -> PA9<Alternate<OpenDrain>>
pub fn into_floating_input(self, cr: &mut CRH) -> PA9<Input<Floating>>
[src]
Configures the pin to operate as a floating input pin
pub fn into_pull_down_input(self, cr: &mut CRH) -> PA9<Input<PullDown>>
[src]
Configures the pin to operate as a pulled down input pin
pub fn into_pull_up_input(self, cr: &mut CRH) -> PA9<Input<PullUp>>
[src]
Configures the pin to operate as a pulled up input pin
pub fn into_open_drain_output(self, cr: &mut CRH) -> PA9<Output<OpenDrain>>
[src]
Configures the pin to operate as an open drain output pin
pub fn into_push_pull_output(self, cr: &mut CRH) -> PA9<Output<PushPull>>
[src]
Configures the pin to operate as an push pull output pin
pub fn into_analog(self, cr: &mut CRH) -> PA9<Analog>
[src]
Configures the pin to operate as an analog input pin
impl<MODE> PA9<MODE>
[src]
pub fn downgrade(self) -> PAx<MODE>
[src]
Erases the pin number from the type
This is useful when you want to collect the pins into an array where you need all the elements to have the same type
Trait Implementations
impl<MODE> OutputPin for PA9<Output<MODE>>
[src]
impl<MODE> OutputPin for PA9<Alternate<MODE>>
[src]
impl<MODE> StatefulOutputPin for PA9<Output<MODE>>
[src]
fn is_set_high(&self) -> bool
[src]
fn is_set_low(&self) -> bool
[src]
impl<MODE> StatefulOutputPin for PA9<Alternate<MODE>>
[src]
fn is_set_high(&self) -> bool
[src]
fn is_set_low(&self) -> bool
[src]
impl<MODE> Default for PA9<Output<MODE>>
[src]
impl<MODE> InputPin for PA9<Input<MODE>>
[src]
impl InputPin for PA9<Output<OpenDrain>>
[src]
Auto Trait Implementations
Blanket Implementations
impl<T> From for T
[src]
impl<T, U> TryFrom for T where
U: Into<T>,
[src]
U: Into<T>,
type Error = Infallible
The type returned in the event of a conversion error.
fn try_from(value: U) -> Result<T, <T as TryFrom<U>>::Error>
[src]
impl<T, U> TryInto for T where
U: TryFrom<T>,
[src]
U: TryFrom<T>,
type Error = <U as TryFrom<T>>::Error
The type returned in the event of a conversion error.
fn try_into(self) -> Result<U, <U as TryFrom<T>>::Error>
[src]
impl<T, U> Into for T where
U: From<T>,
[src]
U: From<T>,
impl<T> Borrow for T where
T: ?Sized,
[src]
T: ?Sized,
impl<T> BorrowMut for T where
T: ?Sized,
[src]
T: ?Sized,
fn borrow_mut(&mut self) -> &mut T
[src]
impl<T> Any for T where
T: 'static + ?Sized,
[src]
T: 'static + ?Sized,
impl<P> ToggleableOutputPin for P where
P: Default,
[src]
P: Default,